The main production process of degradable disposable environmental protection tableware is: according to the order requirements, it is composed of sugarcane pulp and bamboo pulp in proportion. The mixing proportion of sugarcane pulp and bamboo pulp is also different from the customer's requirements for products. Firstly, put sugarcane pulp and bamboo pulp into the hydraulic pulper according to different proportions, soak for about 5 minutes, start the hydraulic pulper for crushing, put the crushed slurry into the slurry preparation tank for dilution, add oil proofing agent and waterproof agent in the dilution process, mix the slurry evenly with the mixer of the slurry preparation tank, and then pump the diluted slurry into the slurry supply tank with a slurry pump for continuous mixing, In this way, the pulping process is completed.

將供漿池內的漿液用漿泵通過供漿管道輸送到到一次性環保紙模自動生產線的成型機臺，在成型機臺上經過真空吸濾去掉漿液中的水分，使?jié){液中的纖維吸附在成型用的絲網上，形成濕胚，通過人工將濕胚和絲網一起轉移到熱壓定型機，在230左右溫度和15噸左右壓力下，用熱壓模具將濕胚中水分?jǐn)D掉，并將濕胚烘干，形成半成品。

The slurry in the slurry supply tank is transported by the slurry pump to the molding machine of the disposable environmental protection paper mold automatic production line through the slurry supply pipeline. The moisture in the slurry is removed on the molding machine through vacuum suction filtration, so that the fiber in the slurry is adsorbed on the wire mesh for molding to form a wet embryo. The wet embryo and the wire mesh are manually transferred to the hot pressing and setting machine, At a temperature of about 230 and a pressure of about 15 tons, the moisture in the wet embryo is squeezed out with a hot pressing die, and the wet embryo is dried to form a semi-finished product.

將定型后的半成品轉移到切邊崗位，通過切邊機用切刀將多余邊料去除。

Transfer the finalized semi-finished products to the edge cutting post, and remove the excess edge materials with a cutter through the edge cutting machine.

切邊后產品轉移到檢驗工序，檢驗工按照客戶的標準進行檢驗，將不符合客戶要求的產品挑揀出來，符合要求的產品轉移到包裝工序，利用紫外線機進行，經過的產品在封閉的無菌包裝間包裝后入庫存放。

After trimming, the products will be transferred to the inspection process. The inspector will inspect according to the customer's standards, pick out the products that do not meet the customer's requirements, transfer the products that meet the requirements to the disinfection and packaging process, and disinfect them with ultraviolet disinfection machine. The sterilized products will be packaged in a closed sterile packaging room and stored in the warehouse.

一次性環保餐具h(yuǎn)ttps://m.qylxschool.cn專注為您提供服務,更多的精彩內容請記得持續關注我們，我們真誠為您提供服務.

Disposable environmental protection tableware http://m.qylxschool.cn Focus on providing services for you. Please remember to pay attention to us for more wonderful contents. We sincerely provide services for you